Slabs

The Solai module allows the verification of the following types:

– Wooden floors
The “Wood Slabs” module allows the complete ULS and SLE verification of a wooden floor with a collaborating concrete slab in compliance with the indications provided by the CNR (DT 206) as well as with the current legislation (DT 206) The wood-concrete connection is considered deformable in accordance with the new Technical Standards for Construction referred to in the Ministerial Decree 17.01.2018 (NTC).

– Floors with beams + vaults
The module Attic with beams and vaults performs the verification of floors made with steel profiles type IPE and HE and vaults. The contribution to the strength of any concrete layer is not taken into account in the calculation.

– Slabs in brick
The concrete slab module performs the calculation of the joist. It is possible to calculate the joists associated with the various masonry floors and associate a card to each of them within the “joists to be calculated” column. Having defined the latter, 3Muri Project  produces a plan with the scan of the joists and calculates the joist through the span of the spans and the loads acting on the model. Calculated the joist it is possible to obtain the dxf output.

– Corrugated sheet floors
The corrugated sheet slab module performs the bending and shear verification at ULS and SLS of the corrugated sheet. Furthermore, it is also possible to carry out checks on the fret in fire conditions.